Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.

Results

electronics:wr703n:webcam: 14 Hits
says 0 microframes [10635.577795] gspca_sn9c20x: Set 640x480 </code> The ''0c45:6270'' is the USB devi... om 384x288 to 640x480. </code> Playing with ''--set brightness=1000% --set contrast=8000%'' gave me better images but still unusable data. I then used ''--set gamma=80%'' which gave me something almost bearab
electronics:wr703n:unbricking: 11 Hits
'), but I verified that you can keep your own and set it instead in minicom this way: setenv serverip... NTFS driver 2.1.29 [Flags: R/O]. msgmni has been set to 58 alg: No test for lzma (lzma-generic) alg: N... ly 24 cmdlinepart partition parsing not available set partition boot set partition kernel set partition rootfs set partition config set partition art s
electronics:wr703n:nohup: 5 Hits
ch -c /tmp/dtach-frameshot -z fswebcam --loop 5 --set exposure=100% --set gamma=50% --set gain=5% --flip=v --set hue=40% --set saturation=0% /overlay/lighttpd/www/z.jpg Note how it does not ca
electronics:wr703n:openwrt: 3 Hits
per submask!) Once logged on ''hornet'', you may set your password with ''passwd''. This will disable ... ou can double check that your network is properly set up with ifconfig From withing the router shell... side of your local area network, you probably can set the network more easily with Luci (next chapter).
electronics:wr703n:sdcard: 3 Hits
ount'' it first) * use ''fdisk /dev/sdh1'' and set the partition type with the command ''t'' followe... nt it from your desktop, it is now ready. ===== Set the SD card for additional storage memory ===== Then set the SD card to replace the internal flash storage
wiki:syntax: 2 Hits
www.google.com or simply www.google.com - You can set the link text as well: [[http://www.google.com|Th... www.google.com or simply www.google.com - You can set link text as well: [[http://www.google.com|This
electronics:raspi:i2c: 2 Hits
/sys/class/i2c-adapter/i2c-1/new_device </code> Set the date like this: hwclock --set --date '2013/11/12 10:31' And query it: hwclock (I get ''Tue Nov
electronics:wr703n:webservice: 1 Hits
lighttp/log/ vi /etc/lighttpd/lighttpd.conf and set ''server.document-root'' to the same directory an
electronics:raspi:archlinux: 1 Hits
e/ -type f -name '*psf*' | sort -n | grep -i lat1 Set a new font (small one): setfont -f lat1-08 or a
electronics:wr703n:relay: 1 Hits
X bytes/s/[^0-9]*\([0-9]*\).*/\1/p' } led() { # set the WR703N led state echo "$1" > /sys/class/leds
rmud_rostock_delta: 1 Hits
cartesian and delta machines. M700 : Set bed plan and height with measured points M701 Z P
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki