You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.


electronics:wr703n:unbricking: 14 Hits
'', you will get an automatic connection with the device. Connect your PC to the USB FTDI (for example th... id read 0x100000ff (...) VFS: Cannot open root device "(null)" or unknown-block(0,0) Please append a co... se Then copy the binary you want to flash to the device into your tftp repository, eg: cp 'wr703nv1_cn_... /cn.bin eth1 link down dup 1 speed 100 Using eth0 device TFTP from server; our IP address is
electronics:wr703n:openwrt: 8 Hits
original chinese firmware or you will brick your device (see here to [[electronics:wr703n:unbricking|unbr... ou can't kill it completely)! ===== Flashing the device ===== Note that all the OpenWRT revisions are fo... 8.1.1 (this address is written on the back of the device). Beside, the above alias will not survive a reb... 8.0.X instead of 192.168.1.X). ==== Flashing the device ==== Log to the device interface on http://192.1
electronics:wr703n:webcam: 8 Hits
ng [[electronics:wr703n:openwrt|OpenWRT]] on your device, and most probably a hub with an [[electronics:wr... <code> [10627.176017] usb 8-2: new high-speed USB device number 4 using xhci_hcd [10627.197624] usb 8-2: New USB device found, idVendor=0c45, idProduct=6270 [10627.197628] usb 8-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [10627.
electronics:wr703n:relay: 5 Hits
WR703N as a WIFI relay for a RJ45-cabled network device ====== Check the documentation here: http://wiki... le! Below is a convenient script to shutdown the device when the wifi is not used for 15 minutes *AND* th... no local SSH connection from to the device. This way I can have "non permanent" wifi intern... he box, which makes it really annoying. Here the device just shuts down when not used after a while. Just
electronics:wr703n:sdcard: 5 Hits
kages because I had not enough memory left on the device (''df'' tells you). I checked with Luci "System /... your desktop PC * open it * double check its device id (eg. ''/dev/sdh1''). You can use ''df'' or ''m... again that the free space changed on the expected device id. * unmount the card, plug the card reader ag... config 'mount' option target /overlay option device /dev/sda1 option fstype ext4 option options
electronics:raspi:i2c: 4 Hits
obe i2c-bcm2708 # Notify Linux of the Dallas RTC device echo ds1307 0x68 | sudo tee /sys/class/i2c-adapter/i2c-1/new_device </code> Set the date like this: hwclock --set ... ll be run at every boot up; <code> # Add the RTC device on boot sudo sed -i 's#^exit 0$#echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device#' /etc/rc.local echo exit 0 | sudo tee -a /etc/rc
electronics:raspi:framebuffer: 3 Hits
r_screeninfo var_info; // Open the framebuffer device file for reading and writing fbfd = open("/dev/... bfd) { printf("Error: cannot open framebuffer device.\n"); return(1); } printf("The framebuffer device opened.\n"); // Get variable screen informatio
electronics:raspi:archlinux: 3 Hits
nstallation ===== Make sure to know your SD card device by checking the difference before/after plugging ... k -l Then transfer the system with ''dd'' (where DEVICE= /dev/sdc for example): sudo dd if=archlinux-hf-2013-07-22.img of=/dev/DEVICE bs=1M To get a progress, you can send SIGUSR to
electronics:wr703: 2 Hits
hinese WR703N almost always resulted in a bricked device (no more light)... So I had to make myself a dire... relay to affer wifi capabilities to a cabled RH45 device ===== On this [[electronics:wr703n:relay|page]]
electronics:transcend_wifi_sd: 1 Hits
bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id Sys
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki